100% Italian product
Expansion vessels with integrated pressure flow switch
3 liter expansion tanks with integrated pressure flow switch.
Technical characteristics of the expansion tanks:
- Butyl membrane
- Maximum temperature 50°C
- P. max. 10 bar
- IP65
- 1′ GAS connection
Protection against:
- Dry running
- Water hammer
- Frequent pump starts
(*) Current version, valid ONLY for models cat. I
For previous versions and for II, III, IV cat. models Declaration fo Conformity issued in the original in the product packaging.
For duplicates plase request to technical@varem.com
Contact us for information
on our products
ELECTROVAREM
| Standard Code | Model |
|---|---|
| EV003363PL220B00 | BASIC 12A (single restart pressure) |
| EV003363PL220000 | STANDARD 12A |
| EV003363PL220C01 | STANDARD 12A with cables (not cabled) |
| EV003363PL22M000 | PLUS 12A with gauge |
| EV003363PL22MC01 | PLUS 12A with gauge and cables (not cabled) |
| EV003363PL26M000 | PLUS/TOP 16A with gauge |
| EV003363PL26MC01 | PLUS/TOP 16A with gauge and cables (not cabled) |
Codes and models for Electrovarem pressure vessels.
Pressures
| 3 Restart pressures Preload | 1.5 bar | 2 bar | 2.5 bar |
|---|---|---|---|
ELECTROVAREM |  | | |
| P minimum 1 | 1.4 | 1.8 | 2.3 |
| P minimum 2 | 2 | 2.5 | 3 |
| P minimum 3 | 2.6 | 3.2 | 4 |
| P max | 4.3 | 5 | 6 |
| Typical Applications | Jet centrifugal and peripheral pumps | Submersible pumps up to 5 bar | Submersible pumps up to 6 bar |
Italiano
Deutsch